Scroll down to 'Connection details'. If there are many session of short duration eg. To fix this there is a router setting usually called something like "Maximum Idle Time" which will cause the internet DSL connection to be dropped after a period of no internet use.
As long as you are using the internet, this setting does nothing, but when you stop using the internet, after the period specified by this setting, your router will tell your DSL modem to disconnect and reconnect. This usually acceptable, but pointless, although it often causes grief for members.
It is best to disable it. Change the number to something larger than 3 days eg. Note : Make sure you are no longer connected to the Internet! Otherwise IE will use it to connect to the modem and block the settings. Click the blue " PPTP " menu button on the left of the now opened window.
You will find a list of entries there: remove them all by clicking the blue " Delete " buttons next to them. One entry cannot be remove and remains it is not an actual entry, it is used to " Add " entries. Click the blue " Apply " button in the left-top corner and click the blue " Save All " button on the lower left.
Now click the blue " Phone Book " button and once more remove all entries. This appears to be an issue with Belgian providers. In the " Phone Book " screen, you must now add a new entry. Enter these setting for KPN :. Click " configure " at the 'MXS' entry with the now following settings. Now - still in the " PPP " window - you should now activate the connection by setting " Status " to " On ", as shown below:. It can take a while before the modem actually connects and changes to the " Up " " State ".
If it does not go to " Up ", I'd suggest you check the settings particularly username and password. DHCP helps you to easily configure network settings of the computers connected to your network. It definitely can make live a lot easier, but it's optional.
The settings for the client are done as described below, most of the time you do not need to do any efforts, since most OS-installations go for the DHCP settings anyway In the table below these field's you will see a list of connected computers by IP-address and MAC-Address Click the blue " Apply " button in the left-top corner and click the blue " Save All " button on the lower left.
Make sure " Obtain an IP address automatically " is checked. Click " OK " and click " OK " once more. The computer now would like to restart: do so. The configuration is done now. Select, with the right mouse button, the LAN network-connection that is connected to the router you can actually rename this connection by pressing F2 and choose " Properties ". This window now appears:. The client is now configured. Microsoft Windows [Version 5. Windows IP Configuration.
Ethernet adapter Home network NIC:. Thank you. Mark, thanks for taking the time to leave a comment and your feedback. I want just to have the antenna outside of the room.
Is it possible to do this??? Please pm to may mail. Thanks for reading my article, and for your comment. If you simply wish to extend the reach of the antenna, my recommendation of installing an external antenna would have the same effect. Set of needle-nose pliers Set of mini Philips screwdrivers … The external antenna you want to use!
Step by step 1. Disconnect the power to your router, and unplug the power adapter from the mains supply. Underneath the feet are four screws one underneath each of the pads. Unscrew each one. Once you have entered the details, click OK to continue, If this stage is skipped the wizard will have used the default username of Administrator and a blank password.
The wizard will now display information for the router it has detected on your network. Once you have confirmed this is the router you wish to upgrade you must select a firmware image to update the router with. As standard the wizard will have no firmware images available in the list above. To continue click Have Disk.
Click Browse to locate the new firmware upgrade file. Browse to the location where you saved the firmware file. File names will vary depending on the router and firmware you are using. Once you have selected the firmware file click Open. The wizard will now check that the file is a valid firmware image to update the router with.
0コメント